Code-3 XT310 Manuel d'utilisateur télécharger pdf (Page 4)

Operation Environment

Ambient Temperature: -10 to +45 degrees C

Relative Humidity: 10 to 85%, non-condensing

Adjustment

After the XT310AS light is securely installed, loosen the adjusting screws located on each end and tilt the light

to the desired angle. Then tighten the screws. Turn the XT310AS LED light on and check the light from the front

or rear of the vehicle, through the window, to ensure that it is at the most desirable angle, and that the light is

not impeded by any obstacles and/or window tinting.

Troubleshooting

The XT310AS have been factory tested and approved. If the light fails to work, check the following:

1. Press the Function Switch (User Supplied) to be sure the “Off” pattern is not selected.

2. Remove the fuse from the vehicle fuse box and check to see if it has blown.

XT310AS FLASH PATTERNS

WARNING FLASH PATTERNS

1 OFF

2 INBOARD OUTBOARD(single ash)

3 LEFT RIGHT(single ash)

4 ALTERNATE(single ash)

5 INBOARD OUTBOARD(Double ash)

6 LEFT RIGHT(Double ash)

7 ALTERNATE(Double ash)

8 INBOARD OUTBOARD(Quad Flash)

9 LEFT RIGHT(Quad Flash)

10 ALTERNATE(Quad Flash)

11 SINGLE OUTBOARD

12 DOUBLE OUTBOARD

13 SINGLE INBOARD

14 DOUBLE INBOARD

15 TRIPLE INBOARD

16 SWEEP

17 CYCLE FLASH

TRAFFIC DIRECTION MODES

1 Right

2 Left

3 Center-Out

4 Right Fast

5 Left Fast

6 Center-Out Fast

7 SINGLE INBOARD-1

8 SINGLE INBOARD-1 Fast

9 SINGLE INBOARD Full-1

10 SINGLE INBOARD Full-1 Fast

END HEAD FLASH PATTERNS (60 fpm)

1 Single Flash Alternate

2 Double Flash Alternate

3 Three Flash Alternate

4 Quad Flash Alternate

5 Five Flash Alternate

6 Single Flash Simultaneous

7 Double Flash Simultaneous

8 Three Flash Simultaneous

9 Quad Flash Simultaneous

10 Five Flash Simultaneous

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Code-3 XT310 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Code-3 XT310