Code-3 XP 9501 Manuel d'utilisateur télécharger pdf

INSTALLATION SHEET FOR XP9501

The XP9501 is shipped with the mounting foot attached to keep the assembly stable during ship-

ment and to eliminate shipping damage. Remove the lens cover as shown below. Set fasteners

aside.

SCREWDRIVER NOTCH

FOR OPENING LENSES

T16320 - #8 SCREW

T16321 - #8 WASHER

XP9500 TOP LENS

REMOVAL PROCESS

Next, remove the five screws attaching the beacon to the

mounting foot. Set these fasteners aside. Separate the

beacon from the mounting foot.

REMOVE SCREWS TO SEPARATE

LOWER LENS FROM MOUNTING

BRACKET

MOUNTING

HOL

(HARDWARE NOT PROVIDED)

WRENCH CLEARANCE HOLES

(OTHER SIDE NOT VISIBLE)

Place the mounting foot where it is to be assembled

to the vehicle and mark the locations. The holes are

large enough for 1/4” fasteners (not included). After

the mounting foot is installed, route the cable

through the hole in the foot and reassemble the

beacon to the foot. Assemble the lens cover to the

top to complete the assembly.

Parts List/Data

T51001 Lower Lens

T51011 Upper Lens

S24194 Mounting Foot

call factory for lighthead information

Dimensions

Beacon only: 12.5"W x 7"D x 2.7"H

Beacon w/ foot: 12.5"W x 7"D x 3.9"H

1 2

Résumé du contenu

Page 1 - INSTALLATION SHEET FOR XP9501

INSTALLATION SHEET FOR XP9501The XP9501 is shipped with the mounting foot attached to keep the assembly stable during ship-ment and to eliminate shipp

Page 2 - PRODUCT RETURNS

Code 3® is a registered trademark of Code 3, Inc.Code 3®, Inc.10986 N. Warson RoadSt. Louis, Missouri 63114-2029—USAPh. (314) 426-2700 Fax (314) 426-

Commentaires sur ces manuels

Pas de commentaire

Code-3 XP 9501 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Code-3 XP 9501. Code 3 XP 9501 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Code-3 XP 9501