Code-3 Shield Mini Bar Manuel d'utilisateur télécharger pdf (Page 5)

TROUBLESHOOTING

Problem Probable Cause Remedy

Mini-Bar does not light a. No power to unit a. Check wire for loose connection

b. Power input wire reversed b. Reverse power wires

c. Damaged or shortaged cabling c. Check cables for damage

d. Defective Mini-Bar d. Contact Service Dept.

Flash Pattern does not change a. Not pressing Pattern Change

Switch (Mag Mount)

b. Not appling Ground to Pattern

Change Wire (Perm Mount)

a. Use Pattern Change Switch

b. Apply Ground (-) to Pattern

Change Wire

LED module housings may become hot with extended use. Allow modules to cool completely

before attempting to remove.

WARNING!

Maintenance:

The Shield™ LED Mini-Bar is designed to be weather proof and maintenance free under normal operating con-

ditions. Refer to the guide below for help with troubleshooting. Should the unit be diagnosed as malfunctioning,

the unit should be removed from service and replaced with a new unit.

1 2 3 4 5 6 7 8

Pas de commentaire

Code-3 Shield Mini Bar Manuel d'utilisateur Page 5