Code-3 Z3 SWIF Manuel d'utilisateur télécharger pdf

INSTALLATION MANUAL

Z3-SWIF

STEERING WHEEL INTERFACE - FORD PI UTILITY & SEDAN

Read all instructions and warnings before installing and using.

This manual must be delivered to the end user of this equipment.

IMPORTANT:

For future reference record your product's serial no. here __________________________________________

INSTALLER:

Mount the Z3 Steering Wheel Interface Box in the desired location using (2) user supplied screws. Note: This box

should not be mounted on the exterior of the vehicle!

Connect the Z3-SWIF Input Control wires according to the chart below.

Z3-SWIF INPUT CONTROL WIRING CHART

Z3-SWIF INPUT WIRE 14 WAY POLICE BASE SIGNAL POWER CONNECTOR

ORANGE/BLACK STRIPE POLICE 4 BUTTON CONTROLLER---BUTTON 1 OUTPUT

ORANGE POLICE 4 BUTTON CONTROLLER---BUTTON 2 OUTPUT

BLUE/BLACK STRIPE POLICE 4 BUTTON CONTROLLER---BUTTON 3 OUTPUT

BLUE POLICE 4 BUTTON CONTROLLER---BUTTON 4 OUTPUT

ADDITIONAL Z3-SWIF CONTROL INPUT WIRING

Z3-SWIF INPUT WIRE OPTIONAL CONNECTIONS

GRAY/BLACK STRIPE OPTIONAL GROUNDED SWITCH (E.G. HIDDEN GUN LOCK)

GRAY OPTIONAL GROUNDED SWITCH (E.G. REMOTE ACTIVATION SWITCH)

BLACK/RED STRIPE NOT USED (NO CONNECTION)

BLACK NOT USED (NO CONNECTION)

1 2 3 4

INSTALLATION MANUALZ3-SWIFSTEERING WHEEL INTERFACE - FORD PI UTILITY & SEDAN Read all instructions and warnings before installing and using.

Page 2

2CONFIGURING Z3-SWIF - ON BENCH:NOTE: A Z3 Amplier with the Z3 Control Head is required in order to congure the Z3-SWIF. The Z3 Amplier will not a

3CLONING Z3-SWIF:NOTE: A Z3 Amplier with the Z3 Control Head is required in order to clone the Z3-SWIF. The Z3 Amplier will not activate any output

Pas de commentaire

Code-3 Z3 SWIF Manuel d'utilisateur